 |
 |
|
|
 |
        |
|
pull pal
|
Take a look below at our selection of ground anchor off road vehicles products. These off road ground anchors are offered at excellent prices. When it comes to the best ground anchor systems, we are your experts. So if you have been looking for a pull pal anchoring device, you have come to the right place. |
|
Prices on this page may vary, Contact us for current pricing. |
| |
The best winch is worthless without something to hook onto! Only the Pull-Pal allows you to get the maximum pull from your winch every time by allowing you to unspool your winch cable to the proper layer that gives you maximum pull. The Pull-Pal is a remote anchoring device that can be placed just about anywhere. You lose considerable pulling power (up to 20% on some units) with each layer of cable left spooled. So when you're really stuck, and you need all the power you can get from your winch, YOU NEED Pull-Pal! |
|
 | The Pull-Pal, a well-engineered anchoring tool, is both portable and well-suited for a wide range of environments. Intended as a tool for winching through sand and mud, Pull-Pal's design relies on useful rules of physics. Its hefty plow blade sets firmly and safely into sand, clay, mud hardpan soil and snow. Pull-Pal gets you up and over hill stalls and minimizes dangerous situations. It allows you more control -- even when you are alone. Saves time, transmissions, and tires. Pull-Pal is designed for winch-equipped Jeeps®, buggies, campers, 2-wheel drive, 4WD SUVs, Trucks, and Hummers®. Ideal for construction surveyors, search and rescue, utility, police, and rural maintenance vehicles. Pull-Pal folds compactly to the size of an ordinary bumper jack for easy storage. It can be mounted inside or outside or stored in an inexpensive gun case. Pull-Pal is ruggedly constructed with a forged chrome-moly plow assembly, welded construction overall, and assembled with Grade 8 bolts for strength and quality. Pull-Pal gets your rig out...fast. Simply insert the plow point into the soil. As the winch cable tightens, the point embeds itself deeply and firmly into the ground and frees your rig with the assistance of the wheels in motion. |
 RW14,000 "NEW MILITARY-SIZE" PULL-PAL RW14,000 45 lbs. FOLDED 45" (9 lbs. HEAVIER THAN THE 11,000, BUT SAME LENGHT!) SPADE - 24" HIGH x 14" WIDE RW14,000 $500.00 + shipping $40 RW14,000 W/Carrying case $572.00 + shipping $51.00 Hawaii, Canada, Alaska & International Orders - Click Here Now even the full size rigs (Hummers, Unimogs, Large Trucks, Etc.) will be virtually unstoppable with the addition of the RW14,000 to their accessory list. |
 RW11,000 PULL-PAL The RW11,000 size unit, weighs only 36 lbs, and is recommended for Jeeps® through mid-size trucks. The Pull-Pal comes with a detachable spade and folds to the size of an ordinary bumber jack for easy storage. Designed to work in most types of ground (including sand, hard-pan soil and even snow.) It can be used to extract your vehicle as well as an anchoring point from the rear when winching another vehicle out. RW11,000 $289.95 + shipping $32 RW11,000 W/Carrying Case $361.95 + shipping $43.50 Hawaii, Canada, Alaska & International Orders - |
 RW6,000 PULL-PAL The smaller RW6,000 is 24 lbs. and is for vehicles such as light buggies, the Suzuki Samurai® and sand rails. This Pull-Pal folds compactly to 32" for easy storage. It can be mounted in or outside. RW6,000 $249.95 + shipping $28 RW6,000 W/Carrying Case $321.95 + shipping $39.50 Hawaii, Canada, Alaska & International Orders - |
 RW2,000 "ATV SIZE" PULL-PAL The RW2,000 weighs just 18 lbs. and is designed specifically for all-terrain-vehicles (ATVs). This Pull-Pal folds compactly to 32" for easy storage on your ATV rack or tool box. RW2,000 $199.95 + shipping $22 Hawaii, Canada, Alaska & International Orders - |
|
| |
|
|
| |
|
